Faq

- Saves space: lower profile, high density package & small footprint

- Full modularity: choose signal, power or coax contacts

- easier maintenance: crimp contacts are removable

- Higher flexibility: options for front/rear panel mount, straight/90°, cable/pcb

- Shorter lead-time & lower MOD

Un DMM Micro-D Mix est un connecteur carte à carte, carte à fil, fil à fil panneau avant et arrière avec une gamme modulaire et hybride. 

Toutes les séries sont dédiées aux applications sur PCB et câble. Elles offrent plus d'avantages par rapport aux connecteurs Micro-D traditionnels de type MIL-DTL-83513G.

Les DMM sont résistants mécaniquement (coque métallique - alliage 6061 avec Ni 10µm chimique) et sont EMI/RFI 360°

Shell: Aluminum 6061 type alloy w/ chemical nickel plating 10µm

Insert: Special PPS ranked UL 94-V0

Jackscrew: passivated stainless steel 300 series

Connecteur millimétrique, c'est un connecteur au pas de 2mm.
Carte à carte, carte à fils et fils à fils, il permet à l'utilisateur de concevoir les combinaisons de son choix, directement adaptées à la fonction à réaliser.

Le CMM 100, de 02 à 25
Le CMM 200, de 04 à 50
Le CMM 220, de 04 à 60 (15 contacts HP/HF max.)
Le CMM 320, de 06 à 120 (20 contacts HP/HF max.)
Le CMM 340, de 06 à 120 (64 contact HP/HF max.)

Nicomatic offers 4 product families : CMM100/200 series, CMM220 series, CMM320/340 series and CMM Multi-Mix series :

a.
CMM 100, simple row of contacts, signal (LF) only
CMM 200, double row of contacts, signal (LF) only

b.
CMM 220 : double row of contacts, this connector benefits from the option of a mixed layout, giving the designers a choice of high frequency, high power, fiber optic (upon request) and low frequency.

c.
CMM 320, three rows environment with up to 16 special contacts (up to 120 LF contacts).
CMM 340, three rows with up to 64 special contacts if no signal contact is used.

d.

CMM Multi-Mix, 2 or 3 rows with possibility to mix HF, HP and LF contacts of same type in one connector.

CMM 100, 02 to25
CMM 200, 04 to 50
CMM 220, 04 to 60 (15 contacts HP/HF max.)
CMM 320, 06 to 120 (20 contacts HP/HF max.)
CMM 340, 06 to 120 (64 contacts HP/HF max.)

The following termination styles are available : board solder, surface mount, crimped on cable or solder on cable and pressfit.

Yes, UL 94-V0 norm.

up to 30 A depending on cable and test routine used.

Up to 11 Ghz (depends on the cable used and test routine followed).

Yes. This is a 1 time reinsertion for LF crimp contacts, 50 cycles for special contacts HF/HP series 30 (Coaxmatic 30) and 5 cycles for special contacts HF/HP series 22 (Coaxmatic 22).

CMM321:
Contact area is copper alloy/ Ni (2µ) + Au 1µ
Contact tail is copper alloy / Ni (2µ) + Au flash 0.1µ
CMM322:
Body is copper Alloy / Ni 2 µ+ Au 0.2 µ
Socket boby is Beryllium Alloy / Ni 2 µ + Au 1.25 µ

Nickel 2µ is used as a barrier against migration of Au. If you put Au directly on copper that would lead to gold pollution and then to oxidation, so there will be a very bad contact resistance.

Avec l'AMM, vous pouvez combiner 6, 10, 20, 34 ou 50 contacts signaux sur le même connecteur. Ces tailles sont standard et stockées. Il est possible d'avoir d'autres arrangements de 4 à 50 points sur demande, veuillez nous contacter s'il vous plaît.

Les AMM standards femelle pré-câblé sont livrés avec verrouillage (V16) et du câble MIL AWG28 bleu, backpotté. Ils sont disponibles en longueurs 150, 300 et 450mm.

Ces versions sont disponibles sur stock.

Vous pouvez aussi choisir d'autres AWG (AWG26 et AWG30) avec d'autres couleurs et des longueurs adaptées sur demande.

You can also select other AWG (AWG26 or AWG30) with other wire colors and adapted length upon request.

Minimum Breakdown Voltage = 1000 Vrms
Withstanding voltage = 750 Vrms
Rated Voltage = 250 Vrms (also called operating voltage)

Tout type de circuit flexible dont l'épaiseur est comprise entre 75µ et 350µ en standard.

Selon la presse (1.27mm ou 2.54, manuelle ou pneumatique) et selon le matériau lui-même, il est possible d'utiliser des épaisseurs de  50µ à 500µ. Merci de nous contacter.

Exemple avec une presse 10500-SA(P):
L'énergie est pneumatique (non électrique) : 6 bars (hydropneumatique)
Effort : 1 800 kg/cm2
Vitesse des contacts à partir d'une bobine : env. 5cm/s
Capacité : jusqu'à 30 cycles par minute (opérateur expérimenté)

PCB Headers :

- Part numbers with -1 at the end = -55C to +150C

- Part numbers with -9 at the end (high temperature insulator) = -55C to +230C

250°C during 5s.

8A to 9A, and according to MIL 3A to 4A (section is 0.20mm which corresponds to AWG22).

Material copper alloy. Composition : Cu 2µ+ Ni 1 to 2µ+ Sn 3 to 5µ = Tin plating over nickel and copper.

Oui. Nicomatic France est en conformité avec les systèmes de management qualité des normes ISO 9001-2008 et EN9100-2009. Les filiales Chinoises et Américaines sont également en conformité avec le système de management qualité ISO 9001-2008.i

Please contact your sales associates. Nicomatic as the manufacturer will provide necessary assistance and support to rectify the issue.

Please complete the form provided by the attached link. Reporting part number, lot number, an explanation of the problem and your expectation of the next step.

Please report the issue to NICOMATIC, the quality department will issue a RMA number if applicable. When returning the parts record the RMA no. On the package.

Les versions P3 de nos câbles sont detinés à une connexion avec connecteurs ZIF-LIF, et les P7 pour la soudure aux PCB.

0.5 / 1 / 1.25 / 1.27 / 2.54mm pitches are available.

From 0.5mm for space saving to 2.54mm, a large variety of pitches is available to suit your needs.

The flat cables used for Nicomatic flexcable jumpers equipped with Crimpflex connectors are made of flat copper conductors both sides adhesive bonded to aluminium foils.

Yes. NICOMATIC provides an interconnect solution which allows to associate the two systems:
- 2SLxx (female housing)
- 1SMxx (male housing)
- 12472 (female contacts)
- 12471 (male contacts)

It is a polyester carrier with pre-positioned domes. It can be described as a custom made array according to the specification of our customers.

The array will make it possible to place at once all the keys of your MMI switch. This you will avoid all problems related to dome positionning, lacking dome double or reverse dome.

The array with kiss cuts is an array with a series of cuts in the polyester/adhesive carrier around the dome. It is considered as a standard product. However, P.A.S. arrays tend also to become a standard. It depends on the usage.

P.A.S. (Pre-assembled spacer). It is an additional layer applied under the retaining layer with channels enabling a volume of air around the dome. The spacer can be made of different materials, for example with polyester 0.1mm thick or transparent PET 0.1mm thick.
The ventilation is made via channels in the spacer layer connecting the various dome chambers.

The data are the same, the only difference is the taping's quantities.

It is the same one.

Shelf life after opening the moisture proof packaging of LEDs has changed from 1 year to 1 week. It is recommended that customers use all LEDs within the package at one time.If the LED after unpacking is not used, it must be resealed and stored, and it is recommended to bake before the next use of the upper part.

It is a patent & trademark of Nicomatic. The Switch'Air dome helps to create a cushion of air between the domes so that they do not stick together. This process ensures an efficient and reliable automatic placement.

There are 2 types of dimple : dimple & micro-dimple. The micro-dimple exists for 6mm domes. Thanks to its small size it allows, in case of dust on the circuit, to eliminate the dust and make the contact.
The dimple on the 8.4mm,10mm & 12.2mm is recommanded for flexible circuits in order to limit the travel.